Application Status: Closed
The application window for RRB Technician Grade I Signal Recruitment 2026 closed on 29 July 2026. Although new applications are no longer being accepted, candidates can use this guide to understand the post, eligibility requirements, salary, CBT exam pattern and selection process.
The recruitment was announced under Centralised Employment Notification (CEN) No. 02/2026. Candidates should check their respective Railway Recruitment Board’s official website for the latest examination updates, notices and corrigenda.
Note: Vacancy figures and other recruitment details should be confirmed against the latest official notification before publication.
RRB Technician Grade I Signal Recruitment 2026 – Overview
The Railway Recruitment Boards released Centralised Employment Notification (CEN) No. 02/2026 for Technician Grade I Signal and various Technician Grade III posts. The notification includes 323 vacancies for Technician Grade I Signal and 6,234 vacancies for Technician Grade III, making a total of 6,557 vacancies across the notified categories.
Technician Grade I Signal is a technical post in the Signal and Telecommunication department. Candidates with the prescribed qualifications in Physics, Electronics, Computer Science, Information Technology or Instrumentation may be eligible. However, applicants must check the exact qualification requirements in the official notification before deciding whether the post is suitable for them.
| Particular | Details |
|---|---|
| Recruitment Authority | Railway Recruitment Boards (RRBs) |
| Notification Number | CEN No. 02/2026 |
| Post Name | Technician Grade I Signal |
| Vacancies for Grade I Signal | 323 |
| Total vacancies under CEN 02/2026 | 6,557 |
| Pay Level | Level 5 |
| Initial Basic Pay | ₹29,200 per month |
| Age Limit | 18–33 years, subject to applicable relaxation |
| Age Calculation Date | 1 July 2026 |
| Medical Standard | B-1 |
| Application Mode | Online |
| Selection Process | CBT, Document Verification and Medical Examination |
| Application Status | Closed |
| Official Websites | Regional RRB websites |
About Indian Railways and Railway Recruitment Boards
Indian Railways is one of the country’s major public transport systems. It connects cities, towns and rural areas and supports passenger travel, freight movement and other important transport services. Running such a large network requires people working in many areas, including engineering, signalling, electrical maintenance, operations and administration.
Railway Recruitment Boards are responsible for conducting recruitment examinations for various railway posts covered by their notifications. They publish employment notices, accept applications, conduct computer-based examinations and shortlist eligible candidates according to the applicable recruitment rules. The concerned Railway administration handles appointment after the required selection and verification stages.
For this recruitment, CEN No. 02/2026 covers Technician Grade I Signal as well as several Technician Grade III categories. Candidates should not confuse the eligibility conditions for these different posts because their educational qualifications, pay levels, medical standards and age limits can vary.
Important: RRB recruitment is based on the official selection process and merit. Candidates should not pay agents or individuals who claim they can guarantee a railway job.
What Does a Technician Grade I Signal Do?
Technician Grade I Signal is a technical position associated with railway signalling. Signalling systems help railway operations function safely and efficiently by supporting the movement and coordination of trains. The role falls under the Signal and Telecommunication department.
Depending on the assigned duties and department requirements, the work may involve technical equipment, inspection, maintenance support and troubleshooting. The actual responsibilities will depend on the post, railway unit and instructions issued by the administration.
This position may suit candidates who enjoy working with technical systems and want to use their science or engineering knowledge in a railway environment. It is important to understand that this is a technical railway post, not a general office or customer-service role.
Important Dates
Candidates should keep the following dates for reference. The application and correction windows mentioned below have already closed.
| Event | Date |
|---|---|
| Indicative Notice | 23 May 2026 |
| Online Application Started | 30 June 2026 |
| Last Date to Apply Online | 29 July 2026, 11:59 PM |
| Last Date for Fee Payment | 31 July 2026, 11:59 PM |
| Application Modification Window | 1–10 August 2026 |
| Scribe Details Submission Window | 11–15 August 2026 |
| CBT Examination Date | To be announced by the concerned RRB |
The notification states that examination-related updates will be communicated through the official RRB websites. As the application process is over, candidates should watch for further notices rather than rely on unofficial social media posts or unverified exam dates.
RRB Technician Grade I Signal Vacancy Details
The notification lists 323 vacancies for Technician Grade I Signal under Pay Level 5. The vacancies are distributed among the participating Railway Recruitment Boards and railway units. The detailed RRB-wise and railway-wise vacancy information is provided in Annexure B of the notification.
The same notification also includes 6,234 vacancies for various Technician Grade III categories. These figures relate to different posts and should not be combined when discussing vacancies for Technician Grade I Signal alone.
Vacancy numbers may be revised according to the requirements of the railway administration. Candidates should therefore refer to the latest official vacancy table or corrigendum, if any, before relying on a vacancy figure.
Salary Details
The initial basic pay for Technician Grade I Signal is ₹29,200 per month under Pay Level 5 of the 7th Central Pay Commission.
Basic pay is the starting component of salary, not necessarily the final amount credited to an employee’s bank account. Depending on the applicable rules and posting, employees may receive admissible allowances and other service benefits. Deductions and individual circumstances can also affect take-home pay.
The notification does not specify one fixed in-hand salary for every selected candidate. It is therefore better to avoid relying on unofficial salary estimates without checking the applicable allowances and deductions.
Salary at a Glance
- Pay Level: Level 5
- Initial Basic Pay: ₹29,200 per month
- Allowances: Applicable allowances as per railway rules
- Other benefits: Subject to the relevant service rules and eligibility
Candidates should read the applicable railway service rules for details about allowances, leave and retirement-related benefits. These benefits should not be treated as identical for every employee or guaranteed beyond the applicable rules.
Educational Qualification
Educational qualification is one of the most important parts of this recruitment. The official notification provides specific qualification routes for Technician Grade I Signal. Candidates must have obtained the required qualification from a recognised university or institution by the application closing date, 29 July 2026.
The notification lists the following qualification options.
1. B.Sc. Qualification
Candidates may be eligible if they have a Bachelor of Science degree in one of the following fields:
- Physics
- Electronics
- Computer Science
- Information Technology
- Instrumentation
The notification also permits a B.Sc. in a combination of sub-streams from the specified basic streams. The exact wording of the qualification and subject combination should be checked in Annexure A of CEN No. 02/2026.
2. Three-Year Diploma in Engineering
Candidates with a three-year Engineering Diploma may also be eligible if it is in the specified basic streams or a permitted combination of those streams.
The relevant basic streams listed in the notification are Physics, Electronics, Computer Science, Information Technology and Instrumentation, as applicable to the prescribed engineering qualification.
Candidates should not assume that every diploma branch is accepted. They need to compare the title and details of their qualification with the official post parameters.
3. Engineering Degree
A degree in Engineering in the specified basic streams, or a permitted combination of those streams, is another qualification route mentioned in the notification.
Applicants should check Annexure A carefully rather than relying only on a broad branch name or a general statement that engineering graduates can apply.
A Note for Candidates with Other Degrees
A degree by itself does not automatically make a person eligible for Technician Grade I Signal. Candidates with qualifications such as B.Com, B.A., M.Com or MBA should not assume that they qualify unless they also hold one of the prescribed qualifications. The same caution applies to candidates with a B.Sc. subject that is not covered by the notification.
Tip: Before applying for any future railway recruitment, compare your exact degree or diploma title, subjects and institution details with the qualification section in the official notification. If you are waiting for the final result of the required qualification, note that this notification did not permit candidates awaiting those results to apply.
Age Limit
For Technician Grade I Signal, the prescribed age range was 18 to 33 years as on 1 July 2026. Candidates had to meet the age conditions applicable to this specific post.
Age relaxation is available for certain eligible categories, subject to the conditions and supporting documents specified in the notification.
Common Age Relaxations
- SC/ST candidates: 5 years
- OBC-NCL candidates: 3 years
- Persons with Benchmark Disabilities (PwBD): Relaxation varies by category and is subject to the notification
- Ex-servicemen and certain railway employees: Specific conditions apply
- Other eligible categories: As detailed in the official notification
These are not the only possible provisions. Special categories may have separate conditions, and relaxations cannot simply be added together in every case. Candidates must check the relevant table in the notification to determine their applicable upper age limit.
Nationality Requirements
The notification sets out nationality and citizenship conditions for applicants. These include Indian citizens and certain other categories, such as citizens of Nepal or subjects of Bhutan, as well as specified persons of Indian origin who have migrated from listed countries.
Some applicants in these categories must obtain a certificate of eligibility from the Government of India. Candidates who do not fall into the standard Indian-citizen category should read the notification’s nationality section to understand the required documentation.
Medical Standards
Technician Grade I Signal carries the B-1 medical standard under this notification. Candidates shortlisted for the relevant stage must meet the medical requirements prescribed by the Railway administration.
Railway medical assessments include visual standards, and the notification lists requirements relating to distance vision, near vision and specified vision tests. Candidates should not assume that meeting the educational and age conditions is enough to guarantee eligibility for appointment.
Medical fitness is assessed according to the applicable rules. Candidates who are found medically unsuitable for the post they have opted for may not receive an alternative appointment.
Tip: If you have concerns about meeting the prescribed medical or vision standard, read the relevant section of the official notification and applicable railway medical rules. Do not rely on assumptions based on general fitness alone.
Application Fee
The notification specifies the following examination fees for CEN No. 02/2026.
| Candidate category | Examination fee |
|---|---|
| Candidates other than the listed concession categories | ₹500 |
| SC/ST candidates | ₹250 |
| Ex-servicemen | ₹250 |
| PwBD candidates | ₹250 |
| Female candidates | ₹250 |
| Transgender candidates | ₹250 |
| Minority candidates | ₹250 |
| Economically Backward Class (EBC) candidates | ₹250 |
The notification provides for a refund, after applicable bank charges, to candidates who attend the CBT. For the ₹500 fee, the stated refund is ₹400; for the ₹250 concession fee, the stated refund is ₹250.
The refund is subject to the notification’s conditions and prescribed banking process. Candidates should also note that EBC, EWS and OBC are different categories. EBC fee concession should not be confused with EWS or OBC-NCL reservation.
The application fee was payable online through the accepted payment methods, including internet banking, debit or credit cards and UPI. The fee-payment deadline for this recruitment has passed.
Selection Process
The selection process for Technician Grade I Signal under CEN No. 02/2026 consists of three main stages.
Stage 1: Computer-Based Test (CBT)
Eligible applicants are required to appear for the computer-based examination. The marks obtained in the CBT are used to shortlist candidates for the next stage according to merit and the applicable recruitment rules.
The examination contains objective-type questions with multiple-choice answers. There is negative marking, so candidates should pay attention to accuracy as well as speed.
Stage 2: Document Verification
Candidates shortlisted based on their CBT performance are called for document verification. They must produce the original certificates and documents required to support the information submitted in the application.
Documents may include proof of age, educational qualifications, category or reservation certificates where applicable, and other documents specified by the RRB.
If the details entered in the application do not match the supporting documents, or if a candidate does not satisfy the eligibility conditions, the candidature may be rejected.
Stage 3: Medical Examination
Candidates must meet the prescribed medical standards for the post. Final appointment depends on the required medical fitness, document verification and other applicable conditions.
Qualifying one stage does not automatically guarantee appointment. The final outcome depends on the full recruitment process and the relevant railway administration’s requirements.
RRB Technician Grade I Signal CBT Exam Pattern
The exam pattern below is taken from the Technician Grade I Signal section of the official CEN No. 02/2026 notification.
| Subject | Indicative Questions | Indicative Marks |
|---|---|---|
| General Awareness | 10 | 10 |
| General Intelligence and Reasoning | 15 | 15 |
| Basics of Computers and Applications | 20 | 20 |
| Mathematics | 20 | 20 |
| Basic Science and Engineering | 35 | 35 |
| Total | 100 | 100 |
Examination Duration and Marking
- Total questions: 100
- Total marks: 100
- Duration: 90 minutes
- Negative marking: One-third of a mark for each incorrect answer
- Question type: Objective-type multiple-choice questions
The notification describes the subject-wise distribution as indicative, so the actual question paper may vary. Candidates should use the official syllabus and any later RRB notices for preparation.
Minimum Qualifying Marks
The notification specifies the following minimum percentage of marks for eligibility, subject to its provisions:
- UR: 40%
- EWS: 40%
- OBC-NCL: 30%
- SC: 30%
- ST: 25%
These are minimum eligibility percentages, not a promise of selection. Actual shortlisting depends on merit, vacancies and the applicable recruitment rules. The notification also describes a possible relaxation for eligible PwBD candidates in specified circumstances.
CBT Syllabus: Topics to Prepare
The official notification lists several subject areas for Technician Grade I Signal. The topics below provide a useful starting point, but they are not an exhaustive list of every possible question.
1. General Awareness
This section may cover current affairs, Indian geography, Indian culture and history, the freedom struggle, the Constitution and polity, the economy, environmental issues, sports, and scientific or technological developments.
Candidates can prepare by reading reliable current-affairs summaries and revising basic general knowledge regularly. It is more useful to understand important events and facts than to memorise large amounts of information without revision.
2. General Intelligence and Reasoning
The syllabus includes topics such as analogies, number and alphabetical series, coding-decoding, relationships, syllogisms, Venn diagrams, classification, directions, analytical reasoning, data interpretation and decision-making.
Practising a few questions every day can help candidates become familiar with common question types. After each practice session, review mistakes to understand why the correct answer works.
3. Basics of Computers and Applications
This section covers computer architecture, input and output devices, storage devices, networking, operating systems, MS Office, data representation, the internet, email, websites, web browsers and computer viruses.
Candidates should revise computer fundamentals and practise basic application-related questions. Focus on understanding the purpose of each component or application rather than memorising terms alone.
4. Mathematics
The listed topics include number systems, rational and irrational numbers, BODMAS, quadratic equations, arithmetic progressions, geometry, coordinate geometry, trigonometric ratios, heights and distances, surface area and volume, sets, statistics and probability.
Start with the fundamentals and practise calculations regularly. Keep a separate note of formulas and revise it often. Since incorrect answers attract negative marking, practise solving questions accurately before trying to increase speed.
5. Basic Science and Engineering
The notification includes physics fundamentals, units and measurements, mass, weight, density, work, power, energy, speed, velocity, heat, temperature, electricity, magnetism, electronic devices, digital electronics, microcontrollers, microprocessors and electronic measurements.
Candidates with a relevant science or engineering background may find some topics familiar, but a systematic revision is still useful. Focus on core concepts and the syllabus rather than studying unrelated advanced material.
Preparation Tips for the CBT
A practical study routine is often more useful than trying to cover every topic in a few days. Candidates preparing for a future examination can organise their study around the official syllabus.
Here are some ways to prepare:
- Read the syllabus first. Make a list of topics from each subject and mark the ones you need to revise.
- Give extra attention to Basic Science and Engineering. It carries the largest indicative share of the Grade I Signal CBT.
- Practise mathematics and reasoning regularly. Short daily sessions can help build speed and improve accuracy.
- Revise computer fundamentals. Include operating systems, networking, MS Office and other listed topics.
- Follow current affairs. Use reliable sources and revise important information periodically.
- Attempt mock tests. Use them to practise time management and identify weak areas.
- Review wrong answers. Understand the reason for each mistake before attempting similar questions again.
- Keep your preparation balanced. Avoid spending all your time on one subject while leaving the others untouched.
Because the CBT includes negative marking, random guessing can reduce your score. Try to improve both accuracy and time management through practice.
Documents to Keep Ready for Document Verification
Candidates who are shortlisted should read their RRB’s instructions carefully and arrange the documents requested for verification. The exact requirements can depend on the candidate’s circumstances and claims made in the application.
Common documents to check include:
- Matriculation or Class 10 certificate showing the date of birth
- Prescribed B.Sc., diploma or engineering degree certificates
- Relevant mark sheets and proof of the final result
- Valid photo identity document
- SC/ST/OBC-NCL/EWS certificate, where applicable
- PwBD certificate, where applicable
- Ex-servicemen documents, where applicable
- Other certificates required by the notification
- Application details and e-call letter, as instructed by the RRB
Keep original documents and the required copies organised. Names, dates and other personal details should match across the application and certificates. If you are currently employed by a government department or public sector undertaking, check whether a No Objection Certificate is required at document verification.
How to Apply for RRB Technician Recruitment in a Future Cycle
Applications for CEN No. 02/2026 are closed, so candidates cannot use the expired application window to submit a new application. The steps below are included as a general reference for future RRB notifications. Always follow the instructions for the particular recruitment cycle.
- Visit the official RRB website and open the relevant employment notification.
- Read the detailed notification and confirm your eligibility for the specific post.
- Create or access the account required by the application portal.
- Enter personal, educational and communication details carefully.
- Select the permitted RRB and post preferences according to the notification.
- Complete the required identity verification and upload the requested details or documents.
- Pay the applicable examination fee through an accepted payment method.
- Review the application before submitting it.
- Save the submitted application details and payment confirmation for future reference.
One important point in CEN No. 02/2026 is that the account-creation details and chosen RRB could not be changed during the modification window. Candidates applying under future notifications should read the relevant rules before submitting their information.
Common Mistakes Candidates Should Avoid
Small mistakes can create problems during recruitment. Before submitting an application in a future cycle, keep the following points in mind:
- Do not apply without checking the exact qualification for your chosen post.
- Do not assume every engineering branch or degree is accepted.
- Enter your date of birth and name according to the required certificates.
- Check category and reservation claims carefully.
- Do not submit multiple applications for the same pay level when the notification prohibits it.
- Use only the official application link.
- Keep your registered mobile number and email address active.
- Never share OTPs, passwords or sensitive account details with people claiming to help with selection.
- Do not pay anyone who promises a guaranteed railway job.
RRBs warn candidates about fake websites, touts and agents. Recruitment is conducted under the prescribed selection process, and no outside person can guarantee selection.
Important Links
| Description | Link |
|---|---|
| Official RRB websites | Visit the official RRB portal |
| RRB Secunderabad | Visit the official website |
| RRB Bhubaneswar | Visit the official website |
| CEN No. 02/2026 notification | Check the notification section of the relevant official RRB website |
| Application status | Closed |
The official RRB websites should be treated as the primary source for examination dates, e-call letters, corrigenda, results and other recruitment updates. The dates shown in third-party articles may not reflect later changes.
Frequently Asked Questions (FAQs)
1. How many vacancies were announced for RRB Technician Grade I Signal Recruitment 2026?
The notification announced 323 vacancies for Technician Grade I Signal. It also included 6,234 vacancies across various Technician Grade III categories under the same CEN, bringing the total to 6,557.
2. What is the basic pay for Technician Grade I Signal?
The initial basic pay is ₹29,200 per month under Pay Level 5. Admissible allowances and deductions depend on the applicable rules and individual circumstances.
3. What is the age limit for Technician Grade I Signal?
The age range was 18 to 33 years as on 1 July 2026, with relaxations for eligible categories according to the notification.
4. Can B.Sc. graduates apply?
Candidates with a B.Sc. in the specified subjects, including Physics, Electronics, Computer Science, Information Technology or Instrumentation, may be eligible. The notification also permits certain combinations of the listed basic streams. Applicants must check Annexure A for the exact requirements.
5. Can candidates with an ITI qualification alone apply for Technician Grade I Signal?
ITI alone is not one of the prescribed qualification routes for Technician Grade I Signal in this notification. The specified routes are the relevant B.Sc. qualification, a three-year diploma in the prescribed engineering streams, or a degree in the prescribed engineering streams.
6. What is the CBT pattern for Technician Grade I Signal?
The CBT has 100 questions carrying 100 marks, with a duration of 90 minutes. The notification provides an indicative subject-wise distribution and specifies negative marking of one-third of a mark for each incorrect answer.
7. What is the selection process?
The process consists of a Computer-Based Test, Document Verification and Medical Examination. Appointment is subject to the required verification and medical fitness.
8. Is the application process still open?
No. The last date to submit the application was 29 July 2026, and the application window is closed. Candidates should check official RRB websites for subsequent notices and future recruitment announcements.
9. When will the CBT take place?
The notification states that the CBT date will be communicated through the concerned RRB websites. Candidates should not rely on an exam date unless it is confirmed in an official notice.
10. Is this article an official recruitment notification?
No. This article is an informational guide based on the CEN No. 02/2026 notification. The official RRB notification and any subsequent corrigenda or notices take precedence if there is a difference.
Conclusion
RRB Technician Grade I Signal Recruitment 2026 offered 323 vacancies for candidates with the prescribed science or engineering qualifications. The post carries an initial basic pay of ₹29,200 under Pay Level 5 and requires candidates to meet the relevant age, educational and B-1 medical standards.
The application window closed on 29 July 2026. Candidates who are following this recruitment should check the official RRB websites for examination-related announcements, while those planning to apply in a future cycle should carefully review the new notification before submitting an application.
At LCJP Job Hub, we aim to share recruitment information in a clear and easy-to-understand format. Readers should always verify important details with the official notification before making decisions about eligibility or recruitment.
Disclaimer: This article is provided for general informational purposes. It is not an official notification and does not guarantee eligibility, shortlisting or appointment. Recruitment details may be changed by the competent authority. Please refer to the official RRB notification and subsequent updates for the final and applicable rules.
About LCJP Job Hub: LCJP Job Hub shares information about government and private job openings, internships, apprenticeships and career-related resources. Our aim is to help readers understand recruitment notices, eligibility conditions and application procedures. Candidates should use official employer or government websites to verify information and submit applications.
Also Read
- RRB Technician Grade III Recruitment 2026
- Bank of India Credit Officer Recruitment 2026
- IAF AFCAT 2 2026 Notification – Eligibility and Selection Details
Also read
RRB Technician Grade III Recruitment 2026: Apply Online
Bank of India credit Officer Recruitment 2026 Apply Now APPLY LINK
IAF AFCAT 2 2026 Notification – Apply Online for Group A Gazetted Officer Posts, Eligibility, Last Date APPLY LINK
Pingback: AIIMS NORCET 11 Recruitment 2026 Notification Out – Apply Online for Nursing Officer Posts